Do you know how to change brother Toner Cartridges? If you experiencing a frustrating notice on your own printer saying “Print Error: low toner”, most likely you have to go out and purchase more Brother toner. But unfortunately, your project doesn’t end at ordering the brand new Brother Toner Cartridges—you you really need to change them out. This is often an intimidating process for many people, so now are step-by-step instructions to help you along with this daunting challenge.

1) Before you go out and purchase Brother Toner cartridges, you need to make sure you understand what model printer you’ve got to insure product compatibility. Write down the model number to help you reference it when you are in the store or online shopping.

2) Once you’ve the proper Brother Toner to your printer model, power your printer OFF and open the cartridge box.

3) Next, you have to open the top cover of the printer. You should do that carefully in order to avoid problems for the interior or outside of the printer.

4) When the printer top cover is removed, you would like to extract the empty Brother Toner cartridge on the printer by pulling upward and from the machine. You must be able to do this without a great amount of force.

5) Once you have taken the Brother Toner cartridge from your printer, you want to prepare the brand new cartridge for insertion. To achieve this, you must remove it from the plastic bag it is contained in. Next, you need to remove the rip strip on the cartridge. The rip strip is attached to a plastic film strip. Removing the rip strip is very important because if you do not your printer will simply produce blank sheets. Be aware when ripping the strip off, as you may get Brother Toner on your own clothes which can stain. If you end up spilling toner on yourself you can wash it off with cold water.

6) Next, you want to place the new cartridge in the printer exactly the same the old Brother Toner cartridge came out. There will likely be arrows in the package to show you within the placement that may help you make sure you’re putting it in correctly. Much like removing the used Brother Toner cartridge, it should slide along with minimal force. If it does not slide in easily you should make sure the Brother Toner cartridge is the correct cartridge for your model printer then guarantee that it is aligned correctly.

7) Once you have the cartridge inside printer properly, put the printer lid back on.

Now you may want to print a few test pages to make sure that things are working the way in which it should. If the print outs look nice: You’re done. Package that old toner cartridge in the box the new toner arrived and recycle it. In case the print outs look bad: Sometimes cartridges could be defective. If there were problems with your test pages, you may need to test the process again with another toner cartridge.
I hope this tips will help you on how to change brother toner cartridges correctly